Відео

I know this was posted a while ago, so I would hope there are lots of miles on the car now and more people that have done this. Have you (or anyone else that follows this cannel that has made this modification) had any problems with it? Also wondering if you or any followers have had any issues passing smog tests with this kit on? My opti is dying and I'm considering this modification, but the car is my daily driver so it will need to pass NV smog check annually. If anyone has done this mod please let me know if it causes you to fail smog check. Thanks.

Look up VLEDS.COM for the best leds😎👊🏻

Perfect 🎉🎉

4k

Go-to Carwash replacement for the Mr. Clean Autodry carwash product that I use is AMMO NYC Hydrate, mist and wipe on with a damp microfiber towel to dry for a spot-free job. It is still more work than the Mr. Clean regime though. I have tried using the Mr. Clean spray gun w/new filter and different soaps but did not achieve the water-sheeting results that the Mr. Clean Polymer soap does. I have also tried stand-alone water filtration units that soften the water and remove all the sediment, but it still does not give the results of the Mr. Clean kit. From what I remember back when it was discontinued, I spoke to someone at P&G who said it cost more to manufacture than it retailed for. All good things come to an end, while bad thing never seem to end.

They should allow accident with airbag deployed to all for free and have your auto insurance company pay a flat per incident fee for non members because most people have cell phone for talking or data and directions and dont want to pay double bills just to get the most serious issue of accident assistance…this could also save insurance money and lives.. since its available its a shame not to use it because of cost over risk benefit.. or as a second option im sure the accident victim would gladly pay a small one time fee so why isnt this on the table by law?

I have the exact same 2010 got it with 37000 km now up to 51. I also want to open the engine bay with a zzp intake and possibly a catless maybe a hann or magna flo. But I love the stock no cel lol. Def don’t want to mess with my baby too much

"A lot sadder" LOL! That really describes the incandescent brightness!

The bottom of the washer should be dry and the top of the washer should be lubricated so the bolt spins freely in the washer stays planted on the head surface not throwing off your torque spec because it will make sure the bottom of the washer is dry

Talk about having someone clueless to show off your product. This guy is as useless as it gets.

Where did you get the wheel caps?

For 97-00 the bleeding sequence is RR-LR-RF-LF. The sequence changes for 01-04, RR, RF, LR, LF.

Will this show you the transmission temp?

Works on my 2021 Acura RDX Aspec! Appreciate the hack

To much work and to tight of an area ... I'm 6'3'', 280 lbs.

Do you need a hyperflash?

Thanks for that video! I'm looking for an update that you can find easily for infotainment system (Seltos EX 2021) in the USA, but it's not available in Canada? Trying to have wireless Apple CarPlay

Thanks for a well done presentation AND would you suggest one unit that claims 2500 sq ft coverage for a 2nd floor home with 3 bedrooms and a couple of baths? Or should I buy a smaller unit, that covers smaller areas and move it from bedroom to bedroom? Appreciate your help!

The Fiat 124 Spider Lusso is always compared to the Mazda MX-5 GT and I get it as so much of the autos are interchangeable. There is a difference especially in styling however in powertrain also. Both are excellent roadsters and have their own loyal followers. For me I preferred the 124 Spider for its overall more European flair and I like the 1.4 Turbo for everyday driving. I don’t track my car but really love the handling, feel and low to the road driving. I have a red Spider with 6 speed manual. The manual transmission is a must for me. Puts the fun into driving a roadster and makes you feel in control over the engine. I likely would have loved the MX-5 also but the look of the Spider more closely represents the Roadsters I grew up enjoying.

Still have that MSD for sale?

Do you need the hyperflash harness with these leds?

I don't want any car to adjust my speed or braking or steer for me............

I took the bigger bolt out & the unit came out

So the 3 bolts are screws ? That’s where I am now

Do you know someone to buy from? Do u have a paar to sell?🙏🙏

Cool, Thank you for sharing this

Great video & I just ordered mine yesterday for my custom C5 & been watching videos on the install ? Where did you put your floor jack ?

Looks like the center piece is for coins...different sizes.

How much money did you end up getting for these headlights?

Get ur hands on Lasfit - LC plus if u have fitment issues. Those led bulbs are design to be compact and fits 95% of the vehicle. They only draw 25W per bulb, 2500 lumens per bulb, with mall cooling fan. These are brighter than what u have. Cooling fan will cool alot more led

Do you still have it? How are you still liking it? Was thinking of picking one up…. Thanks, enjoyed the video.

Hey where did you buy the wire from?

Any clue where I can find one of them doors? I got a 2005 TB and definitely find it dumb to not have em!!

Increasing sales?

I change them for those too, but it was a pain in the ass the get all the wirings behind the lights🥵 My 63 has like a dual retainer cup (not 2 singles) that don't leave any free space ... it doesn't look at all like yours. I was able to jam it it all behind but everything is so tight ... I don't like that much. 😕 But the headlights are amazing! I can finally see at night! 😄

great video, good explanation as well

I used to run a busy detail shop and we used these all the time. We even had Ozone machines. The sponge method works well.

the link for the work light no longer works. what was the brand? thx

excellent job describing

The reson the 383 crank snout is sketchy is because the lt1 crank hub is a taper fit. The aftermarket crank is not

Good video, got me even more excited! Unfortunately I won't be there until Monday, but that will leave me 5 days. I buy, sell, evaluate, and broker collector cars. Last year I sold a 2021 F-150 Super Snake with 700 miles and bought a 1991 (?) Grand Prix pace car. I'm all over the place, I'm surprised I didn't turn up in the video :) Maybe I'll see you there!

Appreciate the step-by-step install! I recently graduated from 1/32 scale slot cars to a 1/1 scale 50th Anniversary coupe, and am now working through exterior updates. I just replaced the tail lights, third brake light, and side markers with smoke LED from vette-lights, super easy install, even the hyper-flash bracket. I'm more nervous about the front corner lights, mainly because I'm not as young as I used to be and those are some tight spaces! Looking forward to watching your other C5 videos, especially on the paint restoration. Great channel!

Did we ever figure out what that hose does? You never told us

I just bought one same color 😊 01 with 56k and I’m definitely doing this

Good video, Now I know what to expect when I change mine out.

I have a black one as well. It's a 2008 that I bought new. I love mine. I have 233,000 miles on it now. Enjoy yours.

Thanks for this video. I have a 96 C4 and vette lights recently released the laser style tails for us and I wanted to see how they performed before pulling the trigger on ordering them for my car.

I loved that thing real quick and easy washes.

@RubberCityMotoring when you did this, did you need to get those funny little cloth spark plug wire heat shields? I just got a set of clear image headers and want to do this right the first time.

Can this diagnose airbag faults ?